List of Support Codes for Printer Errors
- Support Code:
When errors occur, support codes are displayed on your computer screen and the Alarm lamp and/or ON lamp flashes/lights.
A "support code" is an error number, and is displayed along with an error message.
When an error occurs, check the support code and take the appropriate action in response.
Support Codes Displayed on Computer Screen
-
1000 to 1ZZZ
-
2000 to 2ZZZ
-
3000 to 3ZZZ
-
4000 to 4ZZZ
-
5000 to 5ZZZ
-
6000 to 6ZZZ
-
7000 to 7ZZZ
-
A000 to ZZZZ
Alarm Lamp and ON Lamp in the Event of an Error
The number of times the Alarm lamp flashes and the number of times the Alarm lamp and ON lamp alternately flash can be used to determine the appropriate action.
Number of times the Alarm lamp flashes and what to do
Number of flashes |
Cause |
What to Do |
---|---|---|
2 |
During manual duplex printing: |
Follow the instructions on the computer screen to prepare the other side for printing. |
Other: |
Refer to the page corresponding to the support code displayed on your computer screen. |
|
3 |
Paper is jammed. |
|
4 |
Print head is not installed properly. |
|
5 |
The print head may not be installed properly or may not be compatible with this printer. |
|
6 |
Business card-sized paper was loaded horizontally, which caused it to jam. |
|
8 |
Possible causes include the following.
|
Refer to the page corresponding to the support code displayed on your computer screen. |
9 |
There may be paper left inside the printer. |
|
10 |
Unable to proceed with print head replacement because the maintenance cartridge is almost full. |
|
11 |
Cannot perform printing with current print settings. |
Refer to the page corresponding to the support code displayed on your computer screen. |
12 |
Business card-sized paper is not loaded. |
|
14 |
The print head may not be installed properly or may not be compatible with this printer. |
|
15 |
The print head may not be installed properly or may not be compatible with this printer. |
|
17 |
The maintenance cartridge is almost full. |
|
18 |
The maintenance cartridge is full. |
|
20 |
Maintenance cartridge that has been installed in another printer is installed. |
|
22 |
The ink absorber for borderless printing is almost full. |
|
25 |
An internal part will need replacing soon. |
|
28 |
The ink absorber for borderless printing is full. |
|
Lights |
During Replace Ink in Print Head: |
|
Other: |
Number of times the ON lamp and Alarm lamp alternately flash and what to do
Number of flashes |
Cause |
What to Do |
---|---|---|
2 |
Printer error has occurred. |
|
8 |
Printer error has occurred. |
|
10 14 |
An error requiring a repair has occurred. |
Turn off the printer and unplug it. Contact your nearest Canon service center to request a repair. Important
|
Other |
Printer error has occurred. |
Turn off the printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair. Important
|
Note
- If no support code is displayed but the paper is not fed or output normally, see What to Do If Paper Is Not Fed/Output Normally.